Hydrophilic Swellable Bar
FLEXVERSE Swellable water bar is composed of Elastomer & Bentonite based clay which is designed to stop water ingress through cast-in-place concrete construction joints and penetrations in concrete. It has a rectangular profile and is available in several sizes.
Uses
To seal:
- Construction joints
- Pipe, steel and pile cap penetrations through walls and base slabs
- Construction joints in cable ducts, etc.
- Around all types of penetrations through concrete
Characteristics / Advantages
- Easy to apply
- Can be applied on different substrates
- Highly economical
- Swells in contact with water
- Can swell in construction joint gap
- Long-term reliability tested
- Resistant against water and various chemical sub-stances
- No hardening time required
- No welding required
- Adaptable to fit many different detailing tasks
- Different types and dimensions available
Technical Properties
Sr. No. | Parameters | Units | Requirement | Test Method |
1 | Tensile Strength (Min.) | Kg/cm2 | 3 | IS 3400 (Pt-1):2012 |
2 | Elongation (Min.) | % | 150 | IS 3400 (Pt-1):2012 |
3 | Hardness | Shore A | 35 +/-5 | IS 3400 (Pt-2):2003 |
4 | Swelling Ratio (Portable Water) | |||
|
After 24 hours (Min.) | % | 100 | IS 3400 (Pt-6):2012 / ASTM D417 |
|
After 7 days (Min.) | % | 300 | IS 3400 (Pt-6):2012 / ASTM D417 |
Note: We can also manufacture the product as per customer specification / requirements. |
Dimensions
Type | Code | Width | Height |
FLEXVERSE | FVB-401 | 20 mm | 25 mm |
FLEXVERSE | FVB-402 | 20 mm | 10 mm |
FLEXVERSE | FVB-403 | 20 mm | 5 mm |
Note: Other dimensions also available as per customer requirements. |
FLEXVERSE Swellable water bar is polymer based strip composed of synthetic rubber and TPE compound sealing profile with swell seal contact with water to seal all types of joints and penetrations in concrete. It has a rectangular profile and is available in several sizes.
Uses
To seal:
- Construction joints
- Pipe, steel and pile cap penetrations through walls and base slabs
- Construction joints in cable ducts, etc.
- Around all types of penetrations through concrete
Characteristics / Advantages
- Easy to apply
- Can be applied on different substrates
- Highly economical
- Swells in contact with water
- Can swell in construction joint gap
- Long-term reliability tested
- Resistant against water and various chemical sub-stances
- No hardening time required
- No welding required
- Adaptable to fit many different detailing tasks
- Different types and dimensions available
Technical Properties
Sr. No. | Parameters | Units | Requirement | Test Method |
1 | Tensile Strength (Min.) | Kg/cm2 | 3 | IS 3400 (Pt-1):2012 |
2 | Elongation (Min.) | % | 200 | IS 3400 (Pt-1):2012 |
3 | Hardness | Shore A | 35 +/-5 | IS 3400 (Pt-2):2003 |
4 | Swelling Ratio (Portable Water) | |||
After 24 hours (Min.) | % | 100 | IS 3400 (Pt-6):2012 / ASTM D417 | |
After 7 days (Min.) | % | 300 | IS 3400 (Pt-6):2012 / ASTM D417 | |
Note: We can also manufacture the product as per customer specification / requirements. |
Dimensions
Type | Code | Width | Height |
FLEXVERSE | FVP-501 | 20 mm | 25 mm |
FLEXVERSE | FVP-502 | 20 mm | 10 mm |
FLEXVERSE | FVP-503 | 20 mm | 5 mm |
Note: Other dimensions also available as per customer requirements. |